CAB890xx

12 pin HR Male to 12 pin (Large) RM Male - RGB/YC,
9 conductor wire (P/N 380-400-0009)

12 pin

Wire for 12 pin

Signal

Wire for
12 pin large

12 pin
large

1 Blue Shield Ground Blue Shield 1
2 Blue Center B Blue Center 2
3 Green Center G Green Center 3
4 Red Center R Red Center 4
5 Black Wire   Black Wire 5
6 Red Wire* +12VDC Red Wire* 6
7 Yellow Center   Yellow Center 7
8 Yellow Shield & White Wire   Yellow Shield & White Wire 8
9 Orange Center   Orange Center 9
10 Orange & Brown Shields   Orange & Brown Shields 10
11 Green & Red Shields   Green & Red Shields 11
12 Brown Center   Brown Center 12

* Heat shrink to prevent shorting to other wires with 1/8" heat shrink.
Use small piece of 3/8" black glue heat shrink after clamp to take
up slack in the shell on the 15 pin male end.

View from solder side:

12pinmaleHR.gif (3460 bytes)
12 pin HR male
P/N 150-003-0120

12pinsmall.gif (4729 bytes)
12 pin RM male
P/N 150-007-1012


1995-2002 MicroImage Video Systems, a division of World Video Sales Co., Inc.
All rights reserved.  Specifications subject to change without notice. 04/10/12
Problems with this site? Contact the  webmaster  
w w w .  m i v s . c o m