CAB840xx

12 pin HR Male to RGBS pigtails/4 pin YC
9 conductor wire (P/N 380-400-0009)

12 pin

Signal

Wire

 4 pin/RGB BNCs
1 Ground Blue Shield Blue BNC Ground
2 B Blue Center Blue BNC pin
3 G Green Center Green BNC Pin
4 R Red Center Red BNC Pin
5 Ground Black Wire -
6 - - -
7 Sync Yellow Center Sync BNC Pin
8 Ground Yellow Shield Sync BNC Center
9 C Orange Center 3
10 Ground Orange Shield 1
10 Ground Brown Shield 4
11 Ground Green & Red Shields Green & Red BNC Grounds
12 Y Brown Center 2

* Heat shrink to prevent shorting to other wires with 1/8" heat shrink.
Use small piece of 3/8" black glue heat shrink after clamp to take
up slack in the shell on the 15 pin male end.

View from solder side:

maleyc4pin.jpg (5075 bytes)
4 pin YC
P/N 150-006-0104

12pinsmall.gif (4729 bytes)
12 pin RM male
P/N 150-007-1012

© 1995-2002 MicroImage Video Systems, a division of World Video Sales Co., Inc.
All rights reserved.  Specifications subject to change without notice. 04/10/12
Problems with this site? Contact the  webmaster  
w w w .  m i v s . c o m