CAB406xx

High Density 15 pin D-Sub Male to 15 pin Male
D-Sub - RGB/YC, 9 conductor wire (P/N 380-400-0009)

15 pin
high density

Wire for 15 pin high density

Signal

Wire for
15 pin Male

15 pin
Male

11 *Red Wire +12V *Red Wire 1
1 Blue Center NTSC Blue Center 2
3 Orange Center C Orange Center 3
2 Brown Center Y Brown Center 4
14 White Wire Not Used White Wire 5
13 Green Center B-Y Green Center 6
12 Yellow Center R-Y Yellow Center 7
5 Red Shield RXD Red Shield 8
10 Black Wire Pwr Ground Black Wire 9
6 Blue Shield Ground   Blue Shields 10
7 Orange Shield Ground Orange Shield 11
7 Brown Shield Ground Brown Shield 12
8 Yellow Shield Ground Yellow Shield 13
9 Green Shield Ground Green Shield 13
15 Red Center TXD Red Center 15

* Heat shrink to prevent shorting to other wires with 1/8" heat shrink.
Use small piece of 3/8" black glue heat shrink after clamp to take
up slack in the shell on the 15 pin male end.

View from solder side:

15 pin hd.gif (3302 bytes)
15 pin high density

15pin_male.gif (3138 bytes)
15 pin male

use 9 pin TS shell P/N 150-010-7092 use 15 pin TS shell P/N 150-010-7152

1995-2002 MicroImage Video Systems, a division of World Video Sales Co., Inc.
All rights reserved.  Specifications subject to change without notice. 04/10/12
Problems with this site? Contact the  webmaster  
w w w .  m i v s . c o m