CAB405xx

Mini 12 pin HR Male to 15 pin Male D-Sub - RGB/YC,
made with 9 conductor wire (P/N 380-400-0009)

12 pin
HR

Wire for
12 pin HR male

Signal

Wire for
15 pin Male

15 pin
Male

1 Blue Shield Ground Blue Shield 11
2 Blue Center B Blue Center 5
3 Green Center G Green Center 6
4 Red Center R Red Center 7
5 Black Wire Power Ground Black Wire 9
6 Red Wire +12V *Red Wire 1
7 Yellow Center Sync Yellow Center 14
8 Yellow Shield Ground Yellow Shield 13
9 Orange Center C Orange Center 3
10 Org & Brown Shields Ground Org & Brown Shields 10
11 Red & Green Shields Ground Red & Green Shields 12
12 Brown Center Y Brown Center 4

* Heat shrink to prevent shorting to other wires with 1/8" heat shrink.
Use small piece of 3/8" black glue heat shrink after clamp to take
up slack in the shell on the 15 pin male end.
Place 1" clear heat shrink near 15 pin end for label.

View from solder side:

12pinsmall.gif (4722 bytes) 15pin_male.gif (3146 bytes)

12 pin HR male
P/N 150-003-0120

15 pin male
P/N 150-010-1150


1995-2002 MicroImage Video Systems, a division of World Video Sales Co., Inc.
All rights reserved.  Specifications subject to change without notice. 04/10/12
Problems with this site? Contact the  webmaster  
w w w .  m i v s . c o m