SWA1041, SWA2041 Active Video Switch Specifications
Input level  
  Video (SWA1041) 1Vpp composite 75 ohm
  S-Video (SWA2041) only Y-1Vpp comp 75 ohm, C-286mVpp Burst 75 ohm
  TTL level remote 5Vpp (active pull up resisitors in unit)
  RS232 remote as per RS-232/EIA-232 standard, 2400 baud, 8N1
Output level  
  Video, S-Video Video - Same as respective inputs ±2% into 75 ohm
Connectors  
  Video BNC female
  S-Video 4 pin mini-DIN female (standard S-Video connector)
  Remote 8 pin mini-DIN
  Power 2.1mm coaxial power connector
Control Modes  
  1 Absolute binary select (2 wires)
  2 One of 4 select (4 wires)
  3 Toggle up/down (2 wires)
  4 RS232/EIA232 serial control (2 wires)
  5 One of 4 select (mode 1) and RS232/EIA232 serial (mode 4) combined.
Vertical interval Switching Selectable on(synchronous)/off(non synchronous)
Sync System RS-170, NTSC, EIA or PAL
Bandwidth Greater than 30 Mhz
Crosstalk Greater than 50dB
Gain Matching Typically within 2%
Temperature  
  Operating 0° - 40° C (32° - 104° F)
  Storage -40° - 60° C (-40° - 140° F)
Humidity  
  Operating 10% - 90% (non-condensing)
  Storage 5% - 95% (non-condensing)
Power  
  Voltage +9 to +20VDC (+12VDC typical), negative ground
  Consumption 50mA typical (on), 4mA (off) @12VDC
  Protection Automatic electronic fuse, internal, self resetting
Size 5.60" x 5.95" x 1.60" (142 mm x 151 mm x 40 mm)
Weight 16 oz. (450g)
Location of manufacture Pennsylvania USA by MicroImage Video Systems
Power Module Specifications
   
Standard power module Part Number DPD120050-P5
Optional 100-240V unit Part Number DTS120150-P5
   
All prices and specifications are subject to change without notice.
All units come with a power supply and operation manual.
Back to the SWA1041/SWA2041 Datasheet

© 1995-2004 MicroImage Video Systems, a division of World Video Sales Co., Inc.
All rights reserved.  Specifications subject to change without notice. 01/05/04
Problems with this site? Contact the  webmaster  
w w w .  m i v s . c o m