 |
|
|
|
|
|
|
| Front Switches | (9) Power, Camera A, Camera B, Split L/R, Split T/B, Fade, Difference, Freeze and Exchange | |
| Front Controls | (1) Split position/Fade ratio control | |
| Rear Controls | (4) 4 position DIP
switch for options 1 - NTSC/PAL Select 2 - Center Split Mode select 3 - B input Composite/S-Video select 4 - A input Composite/S-Video select |
|
| Rear Connections | (7) Power, composite
input A, composite input B, S-Video input A, S-Video input B, composite output and S-Video
output (RS232 connection optional) |
|
| Internal adjustments | (1) Master clock frequency (27Mhz) Factory set. User adjustment not recommended. | |
| Input levels | ||
| Composite Video | 1Vpp composite (75 ohm) | |
| S-Video | Luminance: 1Vpp, Chrominance: 286mV burst (75 ohm) | |
| Output levels | ||
| Composite | Video - Same as respective inputs ±3% into 75 ohm | |
| S-Video | Y, C - Same as respective inputs ±3% into 75 ohm | |
| Connectors | ||
| Composite in/out | (3) BNC female | |
| S-Video in/out | (3) 4 pin mini-DIN female | |
| Power | 2.1mm female coaxial power jack | |
| RS232 (optional) | 8 pin Mini-Din or older units, 3.5mm stereo phone jack on newer models | |
| Horizontal Split Range | 0 to 53.3uS from
start of active video More than 98% of visible screen width typical |
|
| Vertical Split Range | NTSC/RS170: 0 to 485
lines (fully variable in steps of two) PAL/CCIR: 0 to 585 lines (fully variable in steps of two) 100% of visible screen height typical |
|
| Fade Range | 100% input A, 0% input B to 0% input A, 100% input B, 256 steps | |
| Difference Range | 100% input A, -0% input B to 0% input A, -100% input B, 256 steps | |
| Memory | 10M bit per channel, (full frame x 1 each input channel) | |
| Time Base correction | Digital memory, frame aligned | |
| Time Base window | Full frame, infinite for targeted applications | |
| Frame Sync Controller | MicroImage designed custom logic | |
| Freeze | Full frame volatile. Remembers until power is removed or unfrozen | |
| Input Filters | 3 stage analog anti-aliasing filter | |
| Decoding | 9 bit multi-standard digital decoding | |
| Line Lock | Digital Phase Locked Loop (independent each input channel) | |
| Subcarrier Lock | Digital Phase Locked Loop (independent each input channel) | |
| Comb Filter | Multi-line 2H/4H adaptive (NTSC composite only) | |
| Processing | 8 bit, 4:2:2, ITU-R601 and ITU-R656 standards | |
| Split/Fade Processor | MicroImage Video Systems designed digital signal processor (DSP) | |
| Image Enhance | 2D peaking | |
| Encoding | Full Digital Modulation | |
| Oversampling | 4x (54Mhz) output over sampling | |
| Output DACs | 10 bit digital to analog converters | |
| Output Filters | Digital plus four stage analog anti-aliasing (reconstruction) filters | |
| Output Subcarrier | Digitally synthesized from master clock | |
| Master Clock | 27Mhz +/- 5PPM (0.0005%) typical | |
| Subcarrier Frequency | NTSC: 3.579545Mhz PAL: 4.43361875Mhz (PAL B, D, G, H, I standards) |
|
| Horizontal Frequency | RS-170/NTSC:
15.734Khz typical CCIR/PAL: 15,625Khz typical |
|
| Vertical Frequency | RS-170/NTSC: 59.94Hz
typical CCIR/PAL: 50Hz typical |
|
| Sync System | NTSC, PAL, RS-170, CCIR | |
| Bandwidth | 6Mhz typical | |
| Crosstalk | 48dB | |
| Gain Match A to B | Typically within 2.5% | |
| Temperature | ||
| Operating | 0° - 40° C (32° - 104° F) | |
| Storage | -40° - 60° C (-40° - 140° F) | |
| Humidity | ||
| Operating | 10% - 90% (non-condensing) | |
| Storage | 5% - 95% (non-condensing) | |
| Power | ||
| Voltage | +12VDC (+10 to
+20VDC) , negative ground (Universal power module included with standard products) |
|
| Consumption | 230mA typical (2.8W) | |
| Protection | Automatic electronic fuse, internal, self resetting | |
| Size | 7.60"D x
7.25"W x 1.60"H (193 mm D x 184 mm W x 40 mm H) including knob and connectors |
|
| Weight | 1 lbs. 9 oz., (709g) | |
| DTS120150-P5 or equivalent supplied Universal Power Module specifications. | ||
| Designed
and Manufactured in the USA by MicroImage Video Systems. All specifications are subject to change without notice. |
||
| All
units come with a universal power supply and operation manual. The PXD310E does not provide power to the cameras. The PXD310E replaces the PXD310EN & PXD310EP products |
||
© 1995-2007
MicroImage Video Systems, a division of World Video Sales Co., Inc.
All rights reserved. Specifications subject to change without notice.
07/02/07
Problems with this site? Contact the webmaster
w w w . m i v s . c o m
