 |
|
 Model A209 Automaticam and CCU209 Camera Control Unit Please note: This product has been discontinued. It may be replaced by the D108A series of cameras for some applications.
|
| Camera Specifications | ||
| H Resolution | ||
 |
Y | 470 Lines |
| RGB | 500 Lines | |
| Image Sensor | ||
| Size | 1/2" | |
| Pixels | 768x494 | |
| Scanning System | 2:1 Interlace | |
| Clocks | ||
| Horizontal | 15.73426Khz | |
| Vertical | 59.94Hz | |
| Chroma | 3.579545Mhz | |
| Pixel | 14.318180Mhz | |
| Outputs | ||
| NTSC | 1Vpp into 75 ohms | |
| Y | 1Vpp into 75 ohms | |
| C | 0.286Vpp (burst) into 75 ohms | |
| YUV | Proprietary for CCU209 | |
| Remote Control | ||
| Interface | EIA-232D (RS232), 4800 baud, 7E1 | |
| Format | MicroImage Camera Control Format | |
| Exposure | ||
| Shutter System | 16 bit microprocessor based digital system | |
| Response time | 0.35 sec max response (peak) | |
| Auto range | Off (1/60) to 1/125,000 sec. | |
| Gain System | Digital, integrated with shutter controller | |
| AGC range | 0 to +16dB | |
| Detection | Peak or Average | |
| White Balance | Auto (2800-6200), 3200, 5600 | |
| S/N Ratio | 48dB | |
| Minimum Illumination | 0.3 lux on image sensor surface (gain max) | |
| Lens mount | C/CS Mount | |
| Connectors | 9 pin D-sub female | |
| Power requirements | +12VDC +/- 10%, 420mA typical | |
| Temperature | -10 C to +50 C (90% RH) | |
| Dimensions | ||
| inches | 1.7 (H) x 2.0 (W) x 5.125 (L) | |
| mm | 43 (H) x 50 (W) x 130 (L) | |
| Weight | 12.4oz., 350g | |
| CCU109 / CCU209 | ||
| Controls | Shutter, White Balance, Peak/Average, Auto Lock, Power | |
| Internal switches | AGC on/off | |
| Shutter speeds | Off, 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/10000, 1/15000 | |
| White Bal modes | ATW, Halogen, Xenon, 3200, 5600 | |
| Exposure Detect | Peak or Average reading | |
| Auto Lock | On/Off | |
| Input | A209 camera interface | |
| Outputs | ||
| NTSC | 1Vpp into 75 ohms | |
| Y | 1Vpp into 75 ohms | |
| C | 0.286Vpp (burst level) into 75 ohms | |
| B&W | 1Vpp into 75 ohms | |
| R,G,B | 0.714Vpp into 75 ohms (CCU209 only) | |
| Sync | 2Vpp into 75 ohms (CCU209 only) | |
| Cam Power | 12VDC +/- 5%, 500mA | |
| Comm | MicroImage Camera Control Format (CCF) | |
| Connectors | ||
| Camera | 15 pin D-sub female | |
| NTSC | BNC Female | |
| B&W | BNC Female | |
| S-Video | 4 pin mini-DIN female | |
| RGB | 9 pin D-sub female (CCU209 only) | |
| Power | 120VAC, 60Hz, 25W max. | |
| Temperature | -10 to +50, 90% RH max. | |
| Dimensions | ||
| inches | 2.44 (H) x 7.03 (W) x 6.81 (D) | |
| mm | 62 (H) x 179 (W) x 174 (D) | |
| Weight | 64oz., 1820g | |
| PS1000 Camera Power Supply | ||
| Input | A209 camera interface | |
| Outputs | ||
| NTSC | 1Vpp into 75 ohms | |
| Y | 1Vpp into 75 ohms | |
| C | 0.286Vpp (burst level) into 75 ohms | |
| Cam Power | 12VDC +/- 2%, 500mA | |
| Comm | MicroImage Camera Control Format (CCF) | |
| Connectors | ||
| Camera | 15 pin D-sub female | |
| NTSC | BNC Female | |
| S-Video | 4 pin mini-DIN female | |
| Power | IEC320-C13 compatible | |
| Approvals | UL544TM Medical Grade | |
| Ground Leakage | 50uA max, 20uA typical | |
| Ground Resistance | less than 0.1 ohm | |
| Power input | 120VAC, 60Hz, 40W max. | |
| Power Cord | Belden 17015 or equiv. Hospital Grade with clear green dot plug | |
| Temperature | -10 to +50, 90% RH max. | |
| Dimensions | ||
| inches | 2.44 (H) x 7.03 (W) x 6.81 (D) | |
| mm | 62 (H) x 179 (W) x 174 (D) | |
| Weight | 60oz., 1700g | |
© 1995-2003
MicroImage Video Systems, a division of World Video Sales Co., Inc.
All rights reserved. Specifications subject to change without notice. 09/12/03
Problems with this site? Contact the webmaster
w w w . m i v s . c o m