h3-specifications.gif (1694 bytes)
Model MPX100A B&W Video Comparator System

Camera Specifications
Image Sensor Type 1/2" Interline transfer CCD
Pixels 768x494 pixels monochrome
Area 6.4mm (H) x 4.8mm (V)
Lens Mount C/CS
Scanning system EIA, 525 lines
Sync System Internal or External HD/VD
Pixel Clock Frequency 14.31818Mhz
Horizontal Frequency 15.73426KHz
Vertical Frequency 59.94Hz
Shutter settings Off, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4500, 1/10000 sec.
Horizontal Resolution 570 TV Lines
Sensitiveity 0.05 lux on CCD (F1.4, AGC on, -6dB video level)
S/N ratio >56dB (AGC off, gamma 1.0)
Gamma 0.45 or 1.0
Video Out 1.0Vpp into 75 ohms
Connectors 12 pin Hirose HR10A male
Operating Temperature -5 deg. C to +45 deg. C
Humidity within 20-80%RH
Power +12VDC +/- 10%, 200mA
Dimensions inch 1.97 W x 1.57 H x 3.15 L
mm 50 W x 40 H x 80 L
Weight oz 8.5oz
gram 230
PX101M2 Specifications
Input Level   1Vpp into 75 ohms
Ouput Levels Genlock 1Vpp into 75 ohms
Video Out 1Vpp into 75 ohms
Power (camera) 12VDC @ 250mA max
Connectors CAM A & B 8 pin Mini-DIN
Video Out BNC
Power 2.1mm Coaxial (Barrel) power type
Sync System EIA, RS170 timing
Bandwidth Greater than 30Mhz
Crosstalk Greater than 50dB
Gain Matching A to B Typically within 2%
Temperature Operating 0 to 40 deg C (32 to 104 deg F)
Storage -40 to 60 deg C (-40 to 140 F)
Humidity Operating 10-90% RH (non-condensing)
Storage 5-95% RH (non-condensing)
Power Voltage +12VDC (11 to 13VDC)
Consumption approx 600mA (with cameras)
Standby approx 4mA
Protection Automatic Electronic Fuse, internal, self - resetting
Return to MPX100A datasheet

Power Supply Specifications (DTS120150)

© 1995-2003 MicroImage Video Systems, a division of World Video Sales Co., Inc.
All rights reserved.  Specifications subject to change without notice. 10/04/05
Problems with this site? Contact the  webmaster  
w w w .  m i v s . c o m