M200 B&W Machine Vision Camera Specifications
CCD  
  Size 1/2"
  Pixel count approximately 380,000
  HxV pixels 768(H) x 494(V)
  Chip size 7.95(H) x 6.45(V)mm
  Cell size 8.40(H) x 9.80(V)mm
  Scan area 6.45(H) x 4.84(V)mm
  Optical black 43 Elements(H), 14 Elements(V)
Sync system  
  Timing RS170
  Mode Internal or HD/VD External sync, auto selectable
  Interlace 2:1
  Accumulation Field or frame selecatable
Frequencies  
  Pixel clock 14.318180Mhz
  Horizontal 15.734.26Khz
  Vertical 59.94Hz
Inputs  
  HD/VD 2-5Vpp negative signal, both required
75 ohm or high impedance selecatable
Ouputs  
  Pixel clock 14.31818Mhz at 2.5Vpp into 75 ohms
  HD/VD 2-5Vpp negative signal
75 ohm or high impedance
  Video 1Vpp composite into 75 ohms
Connectors  
  Multi-pin 12 Pin Hirose HR10A-10R-12PA (industry standard)
  Video out BNC Female
Horizontal resolution 570 lines
Vertical resolution  
  Frame 485 Lines
  Field 350 Lines
Minimum illumination 0.3 Lux@ f1.4
S/N ratio 56dB (Gain off)
Gamma 0.45 / 1.0
Gain Fixed / Manual (0 to 20dB)
Shutter  
  Type Electronic
  Speeds 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
Lens mount C/CS
Camera mount Optional, 1/4"-20 UNC hole
  Operating -10° to 40° C (32° - 104° F)
Humidity  
  Operating 10% - 90% (non-condensing)
  Storage 5% - 95% (non-condensing)
Power  
  Voltage +10 to +12VDC (+12VDC typical), negative ground
  Consumption 185mA typical @12VDC
  Protection Automatic electronic fuse, internal, self resetting
Size 1.2" x 1.14" x 2.87" (31mm x 29mm x 65mm)
Weight 3.0 oz. (85g)
Color Black
Camera manufactured in Japan.

All specifications are subject to change without notice.

© 1995-2004 MicroImage Video Systems, a division of World Video Sales Co., Inc.
All rights reserved.  Specifications subject to change without notice. 01/05/04
Problems with this site? Contact the  webmaster  
w w w .  m i v s . c o m